Skip to main content

GraphicsRenderer

Struct GraphicsRenderer 

Source
pub struct GraphicsRenderer { /* private fields */ }
Expand description

Stateful image renderer used when the terminal supports Kitty or Sixel. The dashboard keeps the cell rasterizer as its portable fallback.

Implementations§

Source§

impl GraphicsRenderer

Source

pub fn probe() -> Self

Source

pub fn secondary(&self) -> Self

Create an independent image slot that shares the terminal capability query with the primary renderer. The dashboard uses one slot for the map and one for popup charts so resizing or re-encoding one image does not invalidate the other.

Source

pub fn supports_graphics(&self) -> bool

Source

pub fn protocol(&self) -> ImageProtocol

Source

pub fn filter_label(&self) -> &'static str

Source

pub fn drawable_area(&self, area: Rect) -> Rect

Return the portion of a terminal area occupied by the proportional graphics image. Kitty, Sixel, and iTerm2 may letterbox an image rather than filling every cell in the panel; mouse mapping must use this same rectangle or point markers appear displaced from the click.

Source

pub fn cycle_filter(&mut self) -> bool

Source

pub fn reset_filter(&mut self)

Restore the configured initial interpolation mode and invalidate any cached raster/protocol image that used the previous mode.

Source

pub fn mode_label(&self) -> &'static str

Human-readable renderer mode for the dashboard header. This makes it obvious when a terminal is using a graphics protocol versus the cell fallback.

Source

pub fn render( &mut self, frame: &mut Frame<'_>, area: Rect, image: DynamicImage, ) -> bool

Source

pub fn render_with_key<F>( &mut self, frame: &mut Frame<'_>, area: Rect, key: u64, make_image: F, ) -> bool
where F: FnOnce() -> DynamicImage,

Render a lazily-created image using a caller-owned visual-state key. The map can therefore retain its raster between UI redraws instead of hashing and rebuilding identical pixels on every input event.

Source

pub fn has_pending_image(&self) -> bool

Whether a replacement image is being prepared. The event loop uses this to keep rendering while the old image remains on screen.

Source

pub fn retire_overlay(&mut self)

Forget an overlay image when its popup closes. The next popup draw is encoded afresh, and Kitty virtual placements are removed as Ratatui replaces their placeholder cells with the map frame.

Source

pub fn working_set_bytes(&self) -> usize

Bytes retained by the current encoded image and the replacement being prepared. The input raster is viewport-bounded, so this is the useful accounting boundary for rendered transport buffers.

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for S
where T: Real + Zero + Arithmetics + Clone, Swp: WhitePoint<T>, Dwp: WhitePoint<T>, D: AdaptFrom<S, Swp, Dwp, T>,

Source§

fn adapt_into_using<M>(self, method: M) -> D
where M: TransformMatrix<T>,

👎Deprecated since 0.7.7:

replaced by palette::chromatic_adaptation::AdaptIntoUnclamped

Convert the source color to the destination color using the specified method.
Source§

fn adapt_into(self) -> D

👎Deprecated since 0.7.7:

replaced by palette::chromatic_adaptation::AdaptIntoUnclamped

Convert the source color to the destination color using the bradford method by default.
Source§

impl<T, C> AdaptIntoUnclamped<T> for C
where T: AdaptFromUnclamped<C>,

Source§

type Scalar = <T as AdaptFromUnclamped<C>>::Scalar

The number type that’s used as the color’s components.
Source§

fn adapt_into_unclamped_with<M>(self) -> T

Adapt a color of type Self into a color of type T, using the custom matrix M. Read more
Source§

fn adapt_into_unclamped(self) -> T
where Bradford: LmsToXyz<Self::Scalar> + XyzToLms<Self::Scalar>,

Adapt a color of type Self into a color of type T, using the Bradford matrix. Read more
Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T, C> ArraysFrom<C> for T
where C: IntoArrays<T>,

Source§

fn arrays_from(colors: C) -> T

Cast a collection of colors into a collection of arrays.
Source§

impl<T, C> ArraysInto<C> for T
where C: FromArrays<T>,

Source§

fn arrays_into(self) -> C

Cast this collection of arrays into a collection of colors.
Source§

impl<T> Az for T

Source§

fn az<Dst>(self) -> Dst
where T: Cast<Dst>,

Casts the value.
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<WpParam, T, U> Cam16IntoUnclamped<WpParam, T> for U
where T: FromCam16Unclamped<WpParam, U>,

Source§

type Scalar = <T as FromCam16Unclamped<WpParam, U>>::Scalar

The number type that’s used in parameters when converting.
Source§

fn cam16_into_unclamped( self, parameters: BakedParameters<WpParam, <U as Cam16IntoUnclamped<WpParam, T>>::Scalar>, ) -> T

Converts self into C, using the provided parameters.
Source§

impl<Src, Dst> CastFrom<Src> for Dst
where Src: Cast<Dst>,

Source§

fn cast_from(src: Src) -> Dst

Casts the value.
§

impl<ST, DT> CastableFrom<ST, Initialized, Initialized> for DT
where ST: ?Sized, DT: ?Sized,

§

impl<ST, DT> CastableFrom<ST, Uninit, Uninit> for DT
where ST: ?Sized, DT: ?Sized,

Source§

impl<T> CheckedAs for T

Source§

fn checked_as<Dst>(self) -> Option<Dst>
where T: CheckedCast<Dst>,

Casts the value.
Source§

impl<Src, Dst> CheckedCastFrom<Src> for Dst
where Src: CheckedCast<Dst>,

Source§

fn checked_cast_from(src: Src) -> Option<Dst>

Casts the value.
Source§

impl<T, C> ComponentsFrom<C> for T
where C: IntoComponents<T>,

Source§

fn components_from(colors: C) -> T

Cast a collection of colors into a collection of color components.
§

impl<T> Conv for T

§

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more
§

impl<T> FmtForward for T

§

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
§

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
§

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
§

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
§

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> FromAngle<T> for T

Source§

fn from_angle(angle: T) -> T

Performs a conversion from angle.
Source§

impl<T, U> FromStimulus<U> for T
where U: IntoStimulus<T>,

Source§

fn from_stimulus(other: U) -> T

Converts other into Self, while performing the appropriate scaling, rounding and clamping.
§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self> ⓘ

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self> ⓘ

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T, U> IntoAngle<U> for T
where U: FromAngle<T>,

Source§

fn into_angle(self) -> U

Performs a conversion into T.
Source§

impl<WpParam, T, U> IntoCam16Unclamped<WpParam, T> for U
where T: Cam16FromUnclamped<WpParam, U>,

Source§

type Scalar = <T as Cam16FromUnclamped<WpParam, U>>::Scalar

The number type that’s used in parameters when converting.
Source§

fn into_cam16_unclamped( self, parameters: BakedParameters<WpParam, <U as IntoCam16Unclamped<WpParam, T>>::Scalar>, ) -> T

Converts self into C, using the provided parameters.
Source§

impl<T, U> IntoColor<U> for T
where U: FromColor<T>,

Source§

fn into_color(self) -> U

Convert into T with values clamped to the color defined bounds Read more
Source§

impl<T, U> IntoColorUnclamped<U> for T
where U: FromColorUnclamped<T>,

Source§

fn into_color_unclamped(self) -> U

Convert into T. The resulting color might be invalid in its color space Read more
Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<T> IntoStimulus<T> for T

Source§

fn into_stimulus(self) -> T

Converts self into T, while performing the appropriate scaling, rounding and clamping.
Source§

impl<T> OverflowingAs for T

Source§

fn overflowing_as<Dst>(self) -> (Dst, bool)
where T: OverflowingCast<Dst>,

Casts the value.
Source§

impl<Src, Dst> OverflowingCastFrom<Src> for Dst
where Src: OverflowingCast<Dst>,

Source§

fn overflowing_cast_from(src: Src) -> (Dst, bool)

Casts the value.
§

impl<T> Pipe for T
where T: ?Sized,

§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
where Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R, ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
§

impl<T> Pointable for T

§

const ALIGN: usize

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
§

impl<T> PolicyExt for T
where T: ?Sized,

§

fn and<P, B, E>(self, other: P) -> And<T, P>
where T: Sized + Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns [Action::Follow] only if self and other return Action::Follow. Read more
§

fn or<P, B, E>(self, other: P) -> Or<T, P>
where T: Sized + Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns [Action::Follow] if either self or other returns Action::Follow. Read more
§

impl<T> Read<Exclusive, BecauseExclusive> for T
where T: ?Sized,

Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> SaturatingAs for T

Source§

fn saturating_as<Dst>(self) -> Dst
where T: SaturatingCast<Dst>,

Casts the value.
Source§

impl<Src, Dst> SaturatingCastFrom<Src> for Dst
where Src: SaturatingCast<Dst>,

Source§

fn saturating_cast_from(src: Src) -> Dst

Casts the value.
§

impl<T, S> SimdFrom<T, S> for T
where S: Simd,

§

fn simd_from(_simd: S, value: T) -> T

§

impl<F, T, S> SimdInto<T, S> for F
where T: SimdFrom<F, S>, S: Simd,

§

fn simd_into(self, simd: S) -> T

Source§

impl<T> StrictAs for T

Source§

fn strict_as<Dst>(self) -> Dst
where T: StrictCast<Dst>,

Casts the value.
Source§

impl<Src, Dst> StrictCastFrom<Src> for Dst
where Src: StrictCast<Dst>,

Source§

fn strict_cast_from(src: Src) -> Dst

Casts the value.
§

impl<T> Tap for T

§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
Source§

impl<T, C> TryComponentsInto<C> for T
where C: TryFromComponents<T>,

Source§

type Error = <C as TryFromComponents<T>>::Error

The error for when try_into_colors fails to cast.
Source§

fn try_components_into(self) -> Result<C, <T as TryComponentsInto<C>>::Error>

Try to cast this collection of color components into a collection of colors. Read more
§

impl<T> TryConv for T

§

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T, U> TryIntoColor<U> for T
where U: TryFromColor<T>,

Source§

fn try_into_color(self) -> Result<U, OutOfBounds<U>>

Convert into T, returning ok if the color is inside of its defined range, otherwise an OutOfBounds error is returned which contains the unclamped color. Read more
Source§

impl<C, U> UintsFrom<C> for U
where C: IntoUints<U>,

Source§

fn uints_from(colors: C) -> U

Cast a collection of colors into a collection of unsigned integers.
Source§

impl<C, U> UintsInto<C> for U
where C: FromUints<U>,

Source§

fn uints_into(self) -> C

Cast this collection of unsigned integers into a collection of colors.
Source§

impl<T> UnwrappedAs for T

Source§

fn unwrapped_as<Dst>(self) -> Dst
where T: UnwrappedCast<Dst>,

Casts the value.
Source§

impl<Src, Dst> UnwrappedCastFrom<Src> for Dst
where Src: UnwrappedCast<Dst>,

Source§

fn unwrapped_cast_from(src: Src) -> Dst

Casts the value.
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> ⓘ
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self> ⓘ

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more
Source§

impl<T> WrappingAs for T

Source§

fn wrapping_as<Dst>(self) -> Dst
where T: WrappingCast<Dst>,

Casts the value.
Source§

impl<Src, Dst> WrappingCastFrom<Src> for Dst
where Src: WrappingCast<Dst>,

Source§

fn wrapping_cast_from(src: Src) -> Dst

Casts the value.